Strict Standards: Non-static method Mod_Product::nextitem() should not be called statically in /www/wwwroot/April2018/tin-solder-wire.com/source/widget/product_detail.php on line 221
alpha rosin core solder wire, alpha rosin core solder wire 63/37, 1lb alpha rosin core solder wire, 2lb alpha rosin core solder wire, 0.6mm alpha rosin core solder wire-Product Center-Foshan Xi Feng Tin Products Co., Ltd-
  • this is a image
Name:0.6mm 1lb 2lb alpha rosin core solder wire 63/37
Name:0.6mm 1lb 2lb alpha rosin core solder wire 63/37
Alloy:Tin Lead
Alloy:63/37
Form:Solder wire
core:Rosin core 2.0
Weight:1lb or 2lb
Wire diameter:0.6mm

Send Inquiry

Product Description

0.6mm 1lb 2lb alpha rosin core solder wire 63/37

alpha rosin core solder wire

The alpha rosin core solder wire is an electronic grade solder wire made with a high purity metal of tin and lead, pre fluxed with a rosin based core. The meaning of the making the alpha rosin core solder wire with high purity metals is to enhance the solder-ability and lower the dross. And the alloy of 63/37 of alpha rosin core solder wire is one of the best alloy that users like to use, for its low melting point, good soldering properties and budget cost. And the weight of the solder wire can be made either into 1lb or 2lb. If it's for personal use, a 1lb alpha rosin core solder wire 63/37 would be good enough, as 1lb of solder can do a lot of soldering work. If it's for industrial use in the factory, 1lb alpha rosin core solder wire 63/37 will be more reasonable, then there's no need to change the solder reel too frequently. Also make sure you choose the right wire diameter, a 0.6mm wire diameter of alpha rosin core solder wire is quite good for small parts soldering.

 

How to choose a proper 0.6mm 1lb 2lb alpha rosin core solder wire 63/37?

1. Decide on the alloy of the solder. This is most important, because in some applications it has to be lead free solder wire. The alpha rosin core solder wire 63/37 is lead containing alloy, can't be used for soldering where requires ROHS. If it's for personal use, or for medium to low end quality, it's not always necessary to use the alloy 63/37, a solder alloy 40/60 or even a bit lower is fine too.

2. Dicde on the weight for each roll. As mentioned above, choose the proper weight per roll, either use 1lb alpha rosin core solder wire 63/37 or the 2lb one. But we also provide other smaller rolls or other made to weight.

3. Choose the right wire diameter. We have from 0.6mm to 3.2mm solder wire. A proper wire diameter can gives the right amount of solder each time, this will make soldering work faster.


Contact us for more information. Email: xfsolder@gmail.com or xfsolder@163.com ; Whatsapp/Wechat: 008613450770997 ; main website www.xfsolder.com

 

 

Hits:

Send Inquiry

Name: *
Company:
Address:
Telephone:
Fax:
E-mail: *
Message: *
Verify Code: Change